Autor
Nia's test for a guide is whether the reader can make the next adjustment with the car in front of them. She separates an essential first setup from an expensive detour, names the surface and scale each tip assumes, and refuses to make a beginner feel foolish for asking what a gyro does.
19 historias
Episode 02 of Wes Handy’s inverted rear-motor Auper D6.1 build focuses on rear springs, a Maclan ESC throttle tune and rear toe on slick P-tile.
Nez0’s Bad Shoppe posted a real-time MST RMX 4 GT Red chassis build. Use it as a bench companion, but keep the manual open and save driving setup decisions for the shakedown.
Moose Tuned posted a top-eight RC drift battle between a Reved MC3 and a Shibata GRK 5R HRP. Here is what can be read from the clip, what cannot, and how to judge the chase car without guessing the setup.
SHIBATA's GRK shop added an alloy nose cone for the GS2MOD mount, a GRK4/5 conversion adapter and three more parts. Here is how to read the compatibility before you order.
Banzai Hobby has opened a restock preorder for the Overdose GALM ver.2 Anti+ chassis kit with high-mount motor plates. Treat it as a kit-buying decision, not a setup shortcut.
Rêve D's September update to the BREVE ESC setup data adds two drag brake parameters, Adv Drag Brake Rate and Adv Drag Brake Range. The same announcement warns that updating returns your settings to default.
A 1/10 drift shell is clear polycarbonate, painted on the inside and backed so the color reads from outside. Two guides walk through it, and they disagree on three steps worth knowing before you open a can.
A twin tandem archive upload from Super RC Fukuoka is a free lesson if you know what to watch. Here is a way to break one down, and what has to work on your car before you try to chase anyone.
DOSLOG’s new video points budget-minded RC drifters toward an old chassis route. The useful question is not whether it is cheap, but what has to be confirmed before an old Tamiya-era car becomes a reliable drift build.
Itasha is anime or manga character artwork carried as a livery. In 1/10 RC drift it lives on a polycarbonate shell as printed vinyl or water-slide decals, pre-cut or made to a body template.
Nez0's Bad Shoppe posted a trackside unboxing of the Yokomo RD 2.0 Ready To Run with the Mercury Sayaka Special S15 body and a brushed motor. Here is what a ready-to-run package settles for a first 1/10 RWD drift car, and what it leaves on your shopping list.
RC-Drift Network's random tandem battle between Barry and Myron at RCHQ in San Antonio is a good place to see the two-run format. Here is how a 1/10 RWD driver prepares for one, and what to confirm with the track first.
Super-G's tech blog carried Futaba's announcement of the S-CD500KS Knuckle Servo System in August. The post names the product and little else, so here is how to read a steering announcement before you budget for one.
A new page on Yokomo's store is titled マスタースピード MS2.1 コンバージョンキット (MS2.0用). The material we have gives the product name and the brand and nothing else, so this is a guide to checking a conversion kit before you order one.
Four venues, one national rulebook and a maker's manual, read against each other. The LiPo bag is the one rule none of them leaves out, and some go a lot further.
Four RC drift tracks on three continents publish their rules of entry. Here is what they ask of a first-time visitor, and where their rules differ.
The Japanese RC news site ラジコンもんちぃ writes up a Mini-Z MRD course built beside the grip layout at ラジコン天国名古屋店, with a slippery mat surface and 3D-printed barriers made by regulars.
Before you buy a 1/10 RWD chassis, some tracks will hand you one for an hour. Here is what ROC Drift, SB Raceway, Zero Traction, RC Drift QLD and Devils Drift Crew list on their own pages, all seen on 2026-09-29.
Start with the track you will drive at, then choose between a ready-to-run car and a kit. What each route includes, what you still have to buy, and the electronics a 1/10 RWD drift car cannot run without.
